Datasheets

DCEngine™ Compute Sled – Modular sled architecture enables the operator to customize its mix of compute and storage

Issue link: https://hub.radisys.com/i/858649

Contents of this Issue

Navigation

Page 1 of 1

CORPORATE HEADQUARTERS: 5435 NE Dawson Creek Drive | Hillsboro, OR 97124 | USA +1-503-615-1100 | 800-950-0044 | Fax +1-503-615-1121 | www.radisys.com | info@radisys.com ©2016 Radisys Corporation. Radisys is a registered trademark of Radisys Corporation. All other trademarks are the properties of their respective owners. August 2017 PAGE 2 DCEngine Compute Sled | Radisys Datasheet Configuration Specifications CONFIGURATION FEATURES Dimensions Height 2U Width Half Width Sled Configuration Supports 2 x server boards, up to four sockets, dual disk and NIC expansion card Server Board (2 per sled) Processors Intel® Xeon® Scalable processors, from 70-145W per processor DIMMS 16 DIMM sockets. DDR4 up to 2666 with ECC (up to 512GB) Storage 2 x 2.5" SATA drivers (SSD/HDD) per server Network IO Dual Port 10GbE or 25GbE (data plane) and 2 x 1G (Management) Power (rear) 12VDC bus bar with blind mate to rear of sleds Network IO (rear) 4 x blind mate fiber ports Option to support 1G, 10G, 25G or 40G modes (dependent on NIC installed) Cooling Fans and management 2 x 80mm fans. Simplifies thermal management and reduces noise (vs 40mm in 1U servers) So ware Management System information retrieval (sys-info, sys-cfg), firmware tools (flsh-updt), diagnostics and logging, console. BMC including IPMI2.0, DCMI, Smash, WebUI Operating System Redhat, Ubuntu, CoreOS, others on request Operations and Compliance Environmental Designed for NEBS level 3, 0-55 deg C operating (short term). Targets requirements of GR-63- CORE and GR-1089-CORE Regulatory FCC and CE compliant to class B (safety and emissions/immunity)

Articles in this issue

Links on this page

view archives of Datasheets - DCEngine™ Compute Sled – Modular sled architecture enables the operator to customize its mix of compute and storage